When it comes to enjoying blazing-fast internet all over the house, streaming movies, playing online games, and doing online shopping, there is no thriving competition to the WavLink WiFi extender, is it? However, like any other WiFi device, WavLink extenders are also a victim of technical issues. Among all, “Wavlink extender not connecting to internet” is the most seen issue. Besides, this issue has been reported by a thousand users daily. If you are also sailing in the same boat, we have a rescue plan for you. In this article, you will surely find a fix for the issue you are currently getting. Let’s get started!
Fixed: WavLink Extender Connection Issues
Ranging right from faulty wired or wireless connections to improper WavLink extender setup, there could be a vast number of reasons behind getting the issue. But, before you start with the troubleshooting process, first check with your ISP and confirm the problem is not from his end. Just in case, the service provider of your internet connection gives you his word that everything is fine, then proceed further and troubleshoot the issue on your own by using the hacks provided below.
Power Cycle Your WavLink Extender
The power cycling process works in a number of cases. So, without thinking much, simply power cycle your WavLink device by following the guidelines highlighted below:
- Unplug your WavLink WiFi extender.
- After waiting for a short span of time, plug in your device back to its wall socket.
- Turn it on and see if the issue you are facing with your device is fixed or not.
Fix 2: Opt for an Ethernet Source
If you have connected your WavLink WiFi extender and router using a wireless source, then facing connectivity issues is quite common. In such a case, we suggest you opt for an Ethernet source for connecting your devices. Also, ensure to make use of an Ethernet cable that is well working and you have connected the cable to the correct ports of your extender and router.
By any chance, if you have established the Ethernet connection already between your devices, but still can’t access the internet, it seems like there are some issues with the Ethernet/ wired connection. To get it fixed, check if the Ethernet cable is firmly installed into your devices. On the other hand, if you find even a small cut in the cable, replace it right away with a new one. Sometimes, even a small cut or defect in the cable can lead to the “Wavlink extender not connecting to internet” issue.
Fix 3: Contact Your ISP
Poor internet connectivity can also result in the issue. To get the issue fixed on the fly, you need to contact your internet service provider right away. Maybe you are getting the issue because of your ISP. Just ask him:
- Whether your internet plan is still active. If it has expired, ask him to renew it as soon as possible.
- If the device (router) firmware provided by him is up-to-date or not. By any chance, the firmware has become outdated, ask him to update it.
Apart from this, you also have to check if your router is turned on and configured in a proper way. If your router isn’t configured, you will get no internet. And, if you have no internet, you will get issues while connecting your WavLink extender.
So, we hope that your internet connection is working fine after applying this fix. If yes, try to connect your WavLink extender to the internet again. Are you able to do so? If yes, access the WavLink extender’s firmware update page via WavLink WiFi extender login details and get the firmware of the device updated. Doing so will enhance the performance of your WavLink device, boost up security, and increase The WiFi range up to 70 percent for sure..
Fix 4: Reconfigure WavLink Extender
If even after updating the WavLink extender’s firmware, you are still unable to make the most out of your internet connection, then chances are you have not configured your device in a proper way. Hence, for fixing the improper WavLink extender setup issue, try to reset your device first and then take the plunge to configure it again.
Thus, to reset the extender, all you have to do is, press and hold the reset hole on it, and release it after a couple of minutes.
Now that your extender is reset successfully, without further ado, access WiFi WavLink com ap setup page, and get complete instructions to configure the device with ease.
In a Nutshell
We hope that after following the hacks mentioned in this article, you are not experiencing the “firmware update failed” or firmware update stuck” issue anymore, are you? On the off chance, the issue is fixed, then congrats! The ball is in your court finally! You can enjoy uninterrupted internet speed all over your house.