The amped wireless extender is an outstanding source to boost the home network throughout the house and that’s why millions of people use an Amped extender in their houses. But, when users try to access their extenders’ default IP address, they face an issue.
If you are experiencing the Amped wireless extender IP not working issue and want to resolve it, then you have come to the right place. Here, in the article, you are going to learn different types of Amped wireless extender troubleshooting tips so that you can easily access your extender’s default IP hassle-free.
First, we will introduce you to the reasons because if you are going to fix the issue without knowing the reasons, then you might not be able to fix it hassle-free.
Reasons Amped Extender IP Not Working
Go through the reasons that caused the Amped wireless extender IP not working issue:
- Weak internet connection
- Outdated firmware
- Usage of an outdated internet browser
- Insufficient power supply
- Incorrect usage of the IP address
Thus, these are the reasons that might have caused the Amped wireless extender IP not working issue. You don’t need to worry more about the reasons. You can fix this issue by following the below-mentioned troubleshooting tips. So, keep reading.
Amped Extender IP Not Working | Fixes
In this section, you will learn several types of hacks that will assist you in getting access to the default IP address of the extender. All the hacks are elaborated perfectly. You just need to read them out and implement them as mentioned.
Check Out Internet Connection
You need to check the internet connection. There is a possibility that your internet is working at a glacial rate and that is why you are not able to get access to the extender’s IP address.. If you find that the internet speed is not working properly, you can contact your internet service provider. Sometimes, from the end of the ISP, the internet is not working properly due to many reasons.
Check Out Power Source
You need to check the power source of your extender to which your extender is connected. If you get any damaged and short circuits in the wall outlet, then consider switching your Amped extender to another wall outlet. Sometimes, due to the usage of damaged wall outlets, users face the Amped wireless extender IP not working issue. So, changing the power socket will fix the issue that you are facing continuously.
Therefore, make sure your device gets a fluctuation-free power supply from the power socket and works in good condition. Apart from that, don’t forget to check the power cable. It should be non-damaged.
Verified Default IP Address
You need to confirm whether you used the correct default IP address or not. Sometimes, users make a typing mistake and put the wrong IP address into the address bar.
Moreover, it is also seen that many users put the IP address into the search bar instead of the address bar. Thus, we suggest cross-checking the IP address after inserting.
In case you don’t remember the IP, you can take the help of the Amped extender user manual that came with it. In the user manual, you will get all the default information related to your device.
Keep Web Browser Updated
There is a chance that you used an outdated internet browser and tried to access the IP using an outdated web browser. So, we recommend you check the updated version of the web browser first. If you found an old version of then update it as soon as possible to get access to the extender.
Wipe Out WiFi Interference
You need to be careful while placing the Amped extender. It should be kept far away from the objects that are causing WiFi interference. The objects like Smart TVs, microwaves, refrigerators, cordless phones, and etc. These devices have electromagnetic waves that cause WiFi interference. In case you are still in the same situation, you can perform the Amped wireless extender reset process.
Hence, in this way you can fix the Amped extender IP address not working issue hassle-free.
