Not being able to log into your Netgear Orbi router can surely leave you irked. You might be facing the orbilogin.net not working issue because of a weak internet connection, incorrect web address, corrupted web browser, outdated firmware, or improper installation of the device. Well, whatever the reason is stopping you from performing Netgear Orbi login, we are here to assist you.
In this article, we’ve mentioned the topmost ways through which you can get rid of the issue at hand and access the orbilogin.com web page without any hassle.
Troubleshooting: Netgear Orbi Login Failure
Check the Internet Connection
The minute you come across the orbilogin.net not working error, the first thing that you need to do is, check your internet connection. Is it strong enough? No? Well, that’s probably because your Orbi router and modem are connected wirelessly. To fix the issue, make sure that both your WiFi devices are connected with an Ethernet cable.
On the off chance, if the internet issue persists, then chances are that your Internet Service Provider (ISP) is the one at fault. Therefore, waste no time in contacting them. Once they’ll confirm that the internet issue is from their side, wait for their agent to come over for a fix.
Type the Correct Web Address
You can use the Orbi app to log in. However, if your Orbi app unable to connect to router then use the web browser. Orbilogin.net not working issue might also be troubling you because of an incorrect web address. Thus, make sure that you’re being careful while typing the default web address in the address bar of your web browser. Otherwise, you’ll either get redirected to a third-party website or still be stuck with the same issue.
Update the Firmware
Updating the firmware of your Netgear Orbi device ensures that it’s working efficiently. However, if the firmware of your device isn’t updated, then you’ll face nothing but a dead end. Thus, you must update your device before trying to log into it again.
Here are the instructions that you need to follow in order to update the firmware of your Orbi:
- Connect your Netgear Orbi to the power adapter.
- Plug the power adapter into the wall outlet.
- Open up a web browser on your PC and log into your Orbi device.
- Once you’ve successfully logged into your device, go to Settings.
- Look for the ‘Firmware Update’ option.
- Once found, click on it, and follow the on-screen steps to update your device.
Hopefully, updating your Orbi device will help you in getting rid of orbilogin.net not working issue.
Update the Web Browser
One of the major factors stopping you from accessing the Netgear Orbi login page is an outdated web browser. So, before you try to log into your WiFi device again, update your web browser. If doing so doesn’t resolve the issue, then it is recommended that you switch to another web browser. Also, if required, try clearing up the cache, cookies, and junk files of your browser before putting it to use.
Reset the Orbi Router
When no troubleshooting tip seems to work, factory default reset comes into play. Relax! Resetting your device isn’t rocket science. On the contrary, it’s quite simple. Mentioned below are the steps that you need to follow in order to restore your router to its factory default settings.
- Before you do anything else, make sure that your router is connected to the modem.
- Once ensured, look for the Reset button located at the bottom of your router.
- Did you find it? If yes, take an oil pin or paper clip to press the button.
- Hold the button for a couple of seconds before releasing it.
For your information, resetting the Orbi will not just fix the Netgear Orbi login issues for you, but also the Orbi purple light issue if you ever face it in the future.
Wrap Up
Once you reset your device, perform the process of your Netgear Orbi setup from scratch. Then, try accessing the Netgear Orbi login web page. Are you able to? To share your answer, feel free to comment in the section below.
