In order to gain access to a blazing-fast internet connection, users prefer performing Netgear Nighthawk Router setup in their homes. However, most of them have been complaining that they are not able to complete the setup process via routerlogin.net with ease. In case you are one of them, then worry not because in this post, we have highlighted some troubleshooting hacks. If you follow them carefully, nothing will be able to stop you from getting rid of the setup issues. Taking this into consideration, it is recommended that you read on.
Troubleshooting Nighthawk Netgear Router Setup Issues
Check the Power Supply
The number one and the most obvious reason why you are unable to set up your Nighthawk router in a hassle-free manner is because it is not getting an uninterrupted power supply from the wall outlet that it is plugged into.
This might be because either the power cable connecting the router to the socket is worn out or the wall outlet itself is damaged. To troubleshoot the issue, you need to first replace the cable with a new one and then, plug the router into another outlet.
Switch the Nighthawk Router Connection Source
After following the last troubleshooting hack, if you are still not able to set up your Netgear WiFi router in peace, then it might be because you have used a wireless source of connection to connect the networking devices, as in the Netgear router and the existing modem.
Therefore, you need to change the source of the connection. We would suggest that you use a wired source to connect the devices. Ensure that the ports located on them are not damaged. Also, see to it that the connection is finger-tight.
Eliminate Signal Interference
In case the signals coming out of your Netgear wireless router are getting interrupted, then also you can come across the Netgear router setup issues. To take care of them, you ought to keep signal interference at bay.
You can do the needful by changing the location of your networking device and keeping it away from mirrors, microwave ovens, fish tanks, refrigerators, cordless phones, treadmills, washing machines, televisions, baby monitors, and Bluetooth speakers.
Now, check if you are able to achieve Netgear router setup success via 192.168.1.1 or the web address, i.e. routerlogin.net. Did you still get no luck? Well then, you ought to walk through the next troubleshooting hack.
Use the Nighthawk Router Correct Web Address
Check the web address that you have used to access the Netgear Nighthawk router login page. Is it incorrect? Do the actual web address and the one that you have entered not match? Yes? Well, in that case, it is recommended that you rectify your mistake right away.
You can do so by entering the correct web address, the one that does not have any typing errors. Also, see to it that the web address is being typed in the address bar of the browser rather than the search bar. Trust us; it will surely work for you.
Enter the Right Admin Details
Considering you are reading this troubleshooting hack, it means that none of the above-given ones were able to help you out. It might be because you have entered the wrong admin login password and username to access the Netgear Genie smart setup wizard.
Thus, consider using only the correct login credentials. Avoid entering the details into each other’s fields. For example, do not enter the password under the Username field and the username under the Password field.
If you are not certain of them, then it is recommended that you pay some attention to the user manual. There, you will not find the default credentials of your device, but literally, everything that you need to know about it.
Final Thoughts
Here ends our guide written on how to troubleshoot the Netgear router setup issues. Hopefully, one of the hacks mentioned above was able to help you set up your device in a hassle-free way. On the off chance, you are still stuck in the same mess, consider restarting your device.
Did you like going through this article? Was it worth a read? If you are nodding, then it is a request that you share your feedback with your fellow readers. Now, you might be wondering how to do so. Well, you simply need to make use of the comment section.
In other words, you need to enter what you have to say in the comment section and press the Enter key on your keyboard. Your comment will soon get posted and become visible to the people who are reading the same article as you.
Read More- My Rockspace WiFi Extender Not Working! Help Me to Fix it!