The LED lights present on the hardware unit of a Linksys range extender serve the purpose of revealing the status of power, internet connection, and WPS connection. However, for this purpose, they flash various colors. But, what if they do not show any color at all? Well, in that case, identifying the status of the extender’s activity will become nearly impossible. And also, it is not a surprise that countless extender users no matter whether they have done Linksys access point setup or have installed their extenders in the extender mode have suffered from this problem.
Because you’re reading this post, we are assuming that your Linksys extender is also showing no light. But, you won’t struggle with this issue any more after giving a shot at the hacks mentioned below.
For your information, a Linksys wireless range extender’s LED fails to flash any color on different occasions. These occasions can be insufficiency of the power supply, a technical glitch, an internet connection error, the improper setup of your WiFi device, and even the damaged LEDs. Out of these reasons, what might have dragged you to such a problem? Let’s find out.
Working Solutions: Linksys Extender No Light
- Restart the Extender
We stated earlier that a technical glitch can stop your Linksys range extender from illuminating any color. Know that the reason behind the technical glitch is unknown but it has the complete power to shut off your range extender forever. Keeping this in mind, consider restarting your WiFi extender to get rid of it. The instructions to restart the extender are quite easier than understanding Einstein’s theory of relativity equation. Have a look at them:
- Push the Power button on your range extender and unplug it.
- Give a moment of rest to your device.
- Replug your wireless range extender and switch it on.
As soon as you restart your range extender, see if the lights on your extender show some colors. And yes, you can also disconnect your range extender from the router during the rebooting process. After that, the connection can be restored. But, what’s that? Is the cable connecting your devices damaged? Walk through the next point then.
- Change the Ethernet Cable
Now that you’ve found that the cable connection between your WiFi devices is improper, consider replacing the cable right away. Make sure that the one you use this time is not damaged. In addition, you also have to take care of a few more things with respect to the Ethernet connection which is as follows:
- The connection established must be finger-tight.
- Your WiFi devices’ Ethernet ports should be all well and working.
- The cable must be connected to the correct ports of your extender and router.
To know about the correct ports of your WiFi devices, consider checking out the extender’s user manual. From the Linksys extender setup instructions to firmware update steps, you’ll find everything in there. However, if you have connected your extender and router with the assistance of a wireless source, you ought to place them at a perfect distance. Too less or too much of it and you will witness another extender-related problem.
- Check the Power Supply
Improper power supply to your Linksys range extender has too much to do with the no light issue. Now, the question arises why the power supply is improper. Well, various reasons that can result in the insufficient power supply are as follows:
- The wall socket is damaged.
- You haven’t connected the extender properly.
- The power supply is insufficient from the backend.
Therefore, you are supposed to connect your Linksys extender properly to a working wall socket. Besides, consider making use of a UPS in case you are doubtful that the power supply is inadequate from the backend.
- Reconfigure the Extender
You might also witness no light on your Linksys extender if it is configured improperly. To fix this, all you are supposed to do is reconfigure the extender. But, before this, reset it by pushing the Reset button. The instructions to reconfigure the extender are mentioned below:
- Power up your Linksys extender after placing it close to the router.
- Press the WPS button on the extender.
- Do the same step on your host router too.
In this manner, you will be able to configure your range extender. In case your host router does not support WPS configuration, set the extender up by http //extender.linksys.com.
Sum Up
That’s all you can do to fix the Linksys extender no light issue. We are hopeful that the lights on your extender have returned to their working state. However, make performing the extender’s firmware a habit. It will prevent the extender from falling victim to such issues in the future.
